Do you pass your finger over the surface of the screen of your iPhone 13 Pro but absolutely nothing happens because the touch screen is faulty? This situation will prove to be very frustrating, since iPhones are all touch sensitive, apart from the volume up and volume down buttons, the screenshots side button or the slider. Silent / Ring mode . It is therefore necessary to quickly redo the touch screen of your iPhone 13 Pro or change it to be able to reuse your device as soon as possible. You will then find in this article the manipulations to perform in order to unlock the touch screen of your iPhone 13 Pro.
If there is water on the surface of your iPhone 13 Pro screen, the touchscreen will not work
If you have the wet fingers with some sweat or there is water on the surface of your iPhone 13 Pro screen, the touch screen will not work well. So dry your hands well or remove excess water from the screen of your iPhone 13 Pro before retesting the touch functionality of your device.
The touch screen of your iPhone 13 Pro is lacking: the protective screens
Sometimes, the protective screens that could be found on the market or on the Internet will not be not well adapted et will prevent la touch connection between your finger and the screen of your iPhone 13 Pro. Indeed, these glass or plastic protective screens are sometimes too thick and will not allow you to browse your device. It is therefore necessary to remove this protective screen and ensure that you only have products and accessories approved by the brand. Apple Lossless Audio CODEC (ALAC), to avoid this kind of inconvenience. Once the screen protector is removed from your iPhone 13 Pro, try using the touchscreen of your iPhone 13 Pro again.
Clean your iPhone 13 Pro screen if there was a touchscreen malfunction
Some debris may be the source of the touchscreen failure you are currently experiencing with your iPhone 13 Pro. Clean the screen of your iPhone 13 Pro using a clean, dry, lint-free cloth and then test your device again.
Adjust your device's 3D Touch settings
If the touch screen of your iPhone 13 Pro no longer works, do not hesitate to adjust the settings Touch 3D of the last. In order to do this, you need to follow the steps below:
- Appointment in Part Settings of your iPhone 13 Pro
- Then go to General
- Go to Accessibility
- Select Touch 3D
You can now adjust all the settings of the touch screen of your iPhone 13 Pro.
Problem with the operation of the touch screen of your iPhone 13 Pro: the forced restart of your device
You can try to force restart of your iPhone 13 Pro to see if the problem of operation of the touch screen of your device persists. Indeed, you will have no choice but to force restart your iPhone 13 Pro because when you turn it off in the classic way, you must confirm the extinction using the touch screen of your iPhone 13 Pro, when asked to drag the slider to the right. However, the touch screen of your iPhone 13 Pro not working, you must force your device to shut down.
Unplug all accessories from your iPhone 13 Pro
Accessories can cause your iPhone 13 Pro touchscreen to fail. Unplug all the accessories lightning ou USB-C then try switching to a different cable or charger. It is strongly recommended to use equipment approved by the Apple brand.
Touch screen of your blocked iPhone 13 Pro: screen replacement
If your iPhone 13 Pro was dropped on the ground or received a strong shock as an example, your device's touch screen may be malfunctioning. Regarding a material damage , you won't be able to reuse your iPhone 13 Pro's touchscreen on your own. You must go to a Apple Store or in a Apple-branded repair store to change the screen of your device.
In the event that you are looking for other information on your iPhone 13 Pro, we invite you to read the other articles in the category: iPhone 13 Pro.
