You want to optimize the battery of your Macbook Air or your Macbook Pro but don't know how to do it? Theautonomy of your car's battery performance will indeed depend on the use you make of it. It's important to take care of your battery Macbook as well as its consumption making sure save battery power and see you maintain the latter. Good maintenance will allow you to maintain optimal battery capacity on your Apple device and extend its service life as much as possible. If your Macbook's battery drains too quickly and ends up dead prematurely, then there is definitely a main. This article first explains how check the condition of your Macbook battery then in a second step, the steps to follow in order to extend autonomy of the latter.
How do I charge my Macbook battery the first time I use it?
When for his first ignition from your Macbook device, you simply need to connect the adapter to the mains while your Macbook device is turned off. Proceed to a Loading time at least 2 hours without unplugging it, until the cable indicator shows green light. During the initial loading (very first charge of your Macbook device), it will be necessary fully charge the battery your device, making sure to leave the Macbook plugged in toincrease battery life.
You can also carry out a battery drain procedure: You only have to use your Macbook's battery until it is completely empty (the indicator light is red) and your device eventually turns off. Let your device rest for a period of five hours minimum: Recharge your entire Macbook then it's ready to be used again.
How to check the current battery status of my Macbook Pro or Macbook Air device
Before proceeding with theoptimizing the battery of your Macbook deviceit will take know the current state of the battery of the latter. If your Macbook Pro drains in standby and the battery runs out very quickly, then there is an anomaly. All devices Macbook have a limited number of maximum cycles. Once this limit is reached, it is quite possible to continue using your Apple device. On the other hand, you will see a clear decreased autonomy capacity on your Macbook and the battery will drain very quickly. It will then be necessary to replace the battery of your Macbook as soon as it has reached the maximum number of cycles, so that you can use your Macbook efficiently and benefit from its performance in the best possible conditions. So you will need cknow the number of cycles on your device to see whether or not you need to change the battery. hereThe steps to follow in order to know the number of cycles of your appliance:
- Push the button Option and hold it down. You can now select the " system information", Accessible from apple menu (small black apple which is located at the top left of your screen).
- Select the tab " Food "In the Hardware section of the" system information". You can now consult the current cycle count of your device's battery MAcbook Air or Macbook Pro in the " battery information«
Tips to extend the battery life of my Macbook
here are some Recommendations useful which will allow you tooptimize battery from your Macbook device. Indeed, a few simple actions will help you extend battery life from your Macbook computer.
Disable spotlight to optimize the battery
Turning off suggestions Spotlight will save you battery time on your Macbook. If you turn it off, it will only perform local searches (on your Mac's hard drive) and no longer search for web content. Here are the steps to follow:
- Select the menu Apple (the little black apple located at the top left of your Macbook).
- Enter System Preferences and now click on Spotlight then search results
- You can now uncheck the box Allow Spotlight Suggestions in Search
- Now uncheck the box Spotlight suggestions
Voila: Spotlight searches are now limited only to content on your Macbook Air or Macbook Pro device. More internet browsing, therefore less energy use for each search.
Put your Mac to sleep
If you opt to put your Macbook device to sleep, then the activity will be suspended while leaving your Apple device powered on. Thus, your Macbook device will consume less amount of power. A Mac needs much less time to wake up than it does to start up, which is why this alternative is great. You can either suspend activity on your Mac immediately, or suspend activity on your Macbook device after a certain period of time.
Here are the steps to follow in order to immediately suspend activity on your Macbook device:
- Go to the menu Apple (the little black apple located at the top left of your screen) and select the tab Suspend activity
Here are the steps to follow in order to suspend activity on your Macbook device after a certain period of inactivity:
- Go to the menu Apple (the little black apple located at the top left of your screen) and select the tab System Preferences
- Click on Programmer (in the bottom right corner) and you just have to select the options that interest you (Schedule your Macbook device to start or wake up: you must choose a day or a group of days in the local menu and enter a time OR Schedule your Mac to shut down, suspend, or restart: you only have to check the boxes by choosing the appropriate options and taking care to enter a day and a time).
By configuring start, stop or sleep times you will save a considerable amount of battery power as these options will ensure that your Apple device turns off as soon as you are not using it and just boots up. before you start using it again.
Reduce screen illumination
You can dim your Macbook screen light manually, by pressing the brightness buttons on your keyboard, or use monitor preferences.
You can also go to the menu Apple (the little black apple located at the top left of your screen), then in System Preferences and finally in Energy saver. You can now choose to automatically dim your Macbook screen by clicking Dim the screen slightly when the computer is running on battery power in the sub-window Battery.
Disconnect external devices
The fact of disconnect connected accessories (external hard drives or USB keys for example) to your Macbook computer will allow you tosave battery on your Macbook device. If your Macbook has a CD drive, eject CDs or DVDs if they are not in use. Indeed, leaving them in the drive of your Macbook will make it use battery for no reason.
Disable Wi-Fi and Bluetooth to Save Mac Battery
If you are not using them, then turn off those power guzzling options that continue to consume power while not in use. Here are the steps to follow to disable the option Bluetooth on your Macbook device:
- Go to the menu Apple (the little black apple located at the top left of your screen) then select the tab System Preferences.
- Select the tab Bluetooth. If it is activated, then click on the button to deactivate.
Here are the steps to follow to disable the option Wi-Fi on your Macbook device:
- Go to the menu Apple (the little black apple located at the top left of your screen) then select the tab System Preferences.
- Select the tab Wi-Fi in the list on the left. If it is activated, then click on the button to deactivate.
You can in particular think of deactivating these options when you watch a movie or a series for example, or when you take the plane with your Macbook device. The wireless connections they also consume a lot of energy even when you are not using them. Thus, the battery of your Apple device will drain much less quickly.
Optimize your Macbook battery
You will need to change the power management settings. You have the possibility of optimizing the energy consumption of the battery of your Macbook device. Here are the steps to follow to optimize the energy consumption of your Apple device:
- Go to the menu Apple (the little black apple located at the top left of your screen) then select the tab System Preferences.
- Now click on the tab Energy saver
You now have the possibility to choose between a multitude of options available to you (whether your Mac is plugged in or not for example). For example, you can opt for the possibility ofdarken your screen or of put your Macbook device to sleep faster when running on battery power. You can also set a delay before the suspension of activity; to do so, you will have to click on Battery (still in the game Energy saver) and then drag the sliders Computer in standby after et Screen standby after or even Turn off the screen after. The more you shorten these times, the more battery you will save on your Macbook device. Don't forget to select the option Suspend hard drive activity as soon as possible in the tab Battery ou AC adapter.
Put the Touch Bar to sleep
The Touch Bar consists of a row of keys replaced by a mini OLED screen that displays a whole bunch of different options. Go to the menu Apple (the little black apple located at the top left of your screen) and select the tab System Preferences of MacOS. All you have to do is turn off dynamic display of shortcuts on the touch ribbon of Macbook devices.
Make sure to close the applications after use
Properly quit any apps that you are not currently using. Indeed, an application that you did not close properly, even if you are not using it, will continue to function and therefore to consume energy. If you click on the battery icon at the top right of your Macbook screen, apps that consume a lot of battery power will be displayed. You also have the possibility to go to the activity monitor on your Macbook to see which apps are consuming a lot of power.
What if my Macbook's battery runs out of power?
If your Macbook battery turns red too quickly and abnormally, you will have no choice but to change the battery of your Macbook device. Start with check the number of cycles of the battery from your Apple device (see the beginning of the article). If you have sufficient knowledge with the proper tools, you can buy a Macbook battery (online or in store) and change it yourself. You should know that the operation can be dangerous and that if you have the slightest doubt, it will be better to go to a professional, at the risk of damaging your device.
